Circulating Baths
Ace Glass, Inc. Instatherm; oil bath, low form, 1.2 liter, 142mm ID, 150mm OD, 75mm height, includes 9698-20 connecting controller cord, 120v/5amp max
Instatherm; oil bath, low form, 1.2 liter, 142mm ID, 150mm OD, 75mm height, includes 9698-20 connecting controller cord, 120v/5amp max
Chemglass Life Sciences Oil Bath, 950mL, 150 x 75mm, 120V, 800W
Our new low form oil bath is constructed completely of stainless steel and provides for rapid heating of flasks, beakers, etc. Heating rates run between 10-15 per minute with excellent thermal response. Since the bath is constructed entirely of non-magnetic stainless steel, the contents of the vessel along with the oil itself are able to be magnetically stirred. Each bath is supplied complete with a stainless steel lid to keep the oil clean during storage. Although all sizes of the baths are fitted with a 120V heater, a temperature controller such as the CG-15001 is required to maintain the desired heating temperature. Unit is equipped with a permanently attached 13 inch, 3-wire grounded cord having stainless steel overbraid and a female Twist-Lock connection. Each bath comes complete with a 6 foot grounded extension cord with Twist-Lock connection.
Polyscience 28L Refrigerated Circulator, Standard Digital Controller (-30 to 170°C); 120V, 60Hz
PolyScience™ 28 Liter Refrigerated CirculatorStandard Digital Controller-30 to 170°C Working Temperature RangeTemperature Stability: ±0.04°CCooling Capacity at 20°C: 915W 1100W HeaterFlow Rate: 2.9 gpm (11 LPM)Maximum Pressure: 3.5 psi (0.24 bar)120V, 60HzFeatures:• Large, universal icon and English display• Swivel 180™ Rotating Controller• On-board connectivity: RS-232 serial output• On-screen prompts• Automatic performance optimization• Single-point calibration capability
Huber USA UNISTAT 705 WITH CONTROLLER
- Operating temperature range: -75 to 250 °C
- Temperature stability at -10 °C: 0.01 K
- Heating capacity: 3000 W
- Cooling capacity at 0 °C: 650 W
- Cooling capacity at -40 °C: 600 W
- Pump flow rate: 55 L/min
- Pump pressure: 0.9 bar
- Controller: Pilot ONE
- Display: 5.7 in color touchscreen
- Internal temperature sensor: Pt100
- External sensor connection: Pt100
- Interfaces: Ethernet, USB (Host and Device), RS232
- Refrigeration unit: Air-cooled, CFC- and HCFC-free
- Voltage requirement: 208 VAC, 60 Hz, Single Phase
- Dimensions (W x D x H): 425 x 400 x 720 mm
- Weight: 90 kg
Sigma Aldrich Fine Chemicals Biosciences fORTUNAR Optima glass syri
Interchangeable barrels and plungersflanges flat on two sides to prevent syringe rollingColored ring on plunger ends for easy volume measurementConformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe easy twist locks Luer needle onto syringe
Sigma Aldrich Fine Chemicals Biosciences NMR tube labels temperatur
Self-laminating vinyl labels with white write-on surface resist oil water and solvent. Label wraps around 5mm tube for positive sample identification. Supplied with 26 labels on a card 25 cards per pack.
Alkali Scientific Hermle Z216-MK Refrigerated Mi
Compact quiet and powerful are just a few of the features found on the Hermle Z216-MK series Refrigerated Centrifuge Add to this the versatility of eight available rotor options and the result is the ideal microcentrifuge for the modern molecular biology laboratory All common microtubes (0 2ml 0 5ml 1 5ml 2 0ml) can be accepted as well as PCR strips hematocrit tubes and even 5 0ml centrifuge tubes Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf In addition to retrieving saved programs the easy to use front panel can adjust accel/decel rates and change the end of run alarm tone Despite a remarkably small footprint the RS6203 series offers a uniquely designed 44 x 1 5ml dual row rotor nearly doubling the capacity when compared to traditional microcentrifuges In the Hermle Z216-MK model a powerful compressor driven cooling system maintains temperatures as low as -20 C and is designed to reach 4 C (from room temperature) in l
GA International Cryogenic Labels for Direct Thermal Barcode Printers 1.1875" x 1" + 0.375" (circle) / 30.2mm x 25.4mm + 9.5mm (circle) Rectangle + Circle Orange From -196°C to +93°C (-321°F to +199°F)
These cryogenic barcode labels are specially designed for printing with direct thermal printers. The thermoplastic waterproof labels are specifically designed to permanently adhere to vials, microcentrifuge tubes, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other specimen containers that will undergo long-term cryogenic and deep-freeze storage. These labels have a strong affinity for glass, polypropylene, polyethylene, and other plastic surfaces. The cryogenic labels will remain adhered to tubes through multiple freeze-thaw cycles without cracking or peeling off. These direct thermal cryogenic labels are compatible with most cryogenic storage systems without any hindrance or risk of being scraped off. These labels do not require a self-laminate to work.